SUSPENSION COMPONENTS > Ride Height Lowering Kit (2001-2005 model)
Ride Height Lowering Kit (2001-2005 model)

The product you selected is currently unavailable.

Price: £20.00
Prod. Code: RH-LOW-01-05

Ride Height Lowering Kit  400gm

In response to  requests from members asking if it is possible to lower the seat height  of the FJR, these o/e tie rod arms achieve the desired result without resorting to drastic modifications to the seat thus losing comfort by reducing foam  padding.
The arms allow  the ride height to be dropped by  approximately 10- 20 mm  at the rear so allowing the rider to get a better footing on the ground. 
The kit comprises linkage arms, that are a direct replacement for the o/e  arms and instuctions. They only take about 30 minutes to fit.  By dropping the front forks in the yokes by  approximately 10mm the bike can be lowered further and this will also help keep the standard geometry settings as Yamaha intended.
Please note:As the bike will be sitting lower to the road, ground clearance will be compromised to an extent and the bike will be more difficult to pull onto the centre stand.

 

Please ensure you are a member of the FJ Owners Club before ordering.

Welcome to join on this stie before ordering. see 'Join the FJ Owners Club' in menu 

 

  

Please ensure you are a member of the FJ Owners Club before ordering.

Welcome to join on this site before ordering. see 'Join the FJ Owners Club' in menu